Drivers Subsonic Controller

Drivers Subsonic Controller Driver
Drivers Subsonic Controller Download

This download installs base drivers, Intel® PROSet for Windows. Device Manager, and Intel® PROSet Adapter Configuration Utility for Intel® Network Adapters with Windows® 10. Supported devices This software may also apply to Intel® Ethernet Controllers. It's a third party controller it stops working after 5 mins of play. I found this link to the driver updates for it. Subsonic website has the link below.

AudioControl created the MATRIX PLUS six channel line driver with one goal in mind, to make your car audio system sound better. Modern car stereos boast many features but in many cases rather low pre-amp outputs, especially at low levels. Turn your stereo to a normal volume level, send the signal through a 20-foot cable, and your amps may end up with very little audio signal resulting in weak sound.

Equipped with 24 dB of gain, which can increase pre-amp signal levels up to 9.5 volts RMS/13 volts peak, the MATRIX PLUS line driver will transform your audio system. When integrating multi-media and video games or for driving dozens of amplifiers the MATRIX PLUS line driver gives your system a boost. With multiple sources, like video, the MATRIX PLUS level matches the different volume levels so switching between them is seamless. For SPL vehicles, the internal linking system of the Matrix means that two channels of input can drive all six outputs and each output can drive up to seven amplifiers.

The MATRIX PLUS line driver features an optional dash control input which facilitates remote control of pre-amp signal levels. This makes the MATRIX PLUS line driver an ideal controller for overall system master volume or subwoofer levels.

Let the AudioControl’s MATRIX PLUS put your system into high gear.

FEATURES

High signal voltage capability: 13 volts peak output
24dB of gain
Six channels of input and output
Balanced differential inputs
Low-impedance outputs
Optional Remote Level Control (ACR-1)
PFM Subsonic filter
Output level controls
Ultra-low distortion, ultra-quiet operation
Selectable ground isolation
Optimum voltage indicator LED’s

INPUTS

Preamp Inputs: 3 (6 channels)
Input Gain: 24dB
Input Impedance: 20kΩ

OUTPUTS

Preamp Outputs: 3 (6 channels)
Maximum Output Level: 9.5Vrms
Output Gain: -12dB to +24dB
Output Impedance: 50Ω

PERFORMANCE

Total Harmonic Distortion: 0.005%
Frequency Response: 10Hz-100kHz ±1dB
Signal to Noise: >110dB

GENERAL

Power Supply: Transformer Isolated PWM
Current Draw: 250mA
Recommended Fuse Rating: 1A

WEIGHTS & DIMENSIONS

Dimensions: 4.6″W x 7.1″D x 1.2″H
Weight: 1.3lbs (0.6kg)

IN THE BOX: Matrix Plus, Power Connector, Manual, Warranty

To update your controller, please identify your controller and follow the instruction below

Be carefull the dirver is differnet for wired or wireless controller

How to update PRO4 WIRELESS CONTROLLER & PRO5 CAMO WIRELESS CONTROLLER

Download the driver

Click the “Download Update“ button below and then open the downloaded file.

Connect your dongle

With a needle, press and hold the buttton in the hole of the dongle, then plug the dongle and release the button.

Start the update

Click on « Update».

How to update PRO4 & PRO5 WIRED CONTROLLER

Download the driver

Click the “Download Update“ button below and then open the downloaded file.

Please cheack you have download the right file, it must begin by “Firmware-Pro5-Wired” if this is not the case, pree cancel and download it another time.

Connect your controller

Press and hold the right buttons of the cross key and the left stick, then you can plug your controller.

Start the update

Click on « Update».

How to update ProS Wireless controller Switch

Plug the USB C cable into your ProS Switch Wireless Controller

Download the driver

Click the “Download Update“ button below and then open the downloaded file.

Press and hold the left stick (L3), then you can plug your controller into the computer.

Start the update